sorry i missed this, yes, just tap up or down the steering shaft(collapsible) to suit the height change and it bolts straight in. XA to XG (XG pipes different but ultimately the same) pitman arm is different for power steering box also. 

Scrap that. Mechanic has just managed to get it in. Yayyy!!


Sent from my iPhone using Tapatalk

I have XA with manual steering and trying to swap to XF power steering box which I thought was pretty straightforward; just shorten the steering column.   Haven’t seen it myself but apparently would have to modify the chassis for the power steering box to fit. The power steering box I have is supposed to be out of a 1985 XF Fairmont. Are there different types of power steering box?   XA manual box top XF power steering box bottom       Sent from my iPhone using Tapatalk

Yeah, I contacted crow cams and their recommendation was to lock the cam and run a regular AU grind.

I can measure this, as I have each variant of XG, plus XH and XF utes.

Like I said, have a chat with Crow Cams and/or Clive Cams, they might have grinds that are suitable to use with VCT.

I couldn't believe it when I went to bolt it in,trims were in such good condition, then painted them and don't fit,another x file.

i showed a mate of mine this, and he responded with Basically if the XG has XF roof lining and interior light seatbelt same as XF,
or if it has XH roof lining and E series interior light, will have different seatbelt location

Thanks for the info.   Looks like my engine will be a VCT in name only🤣

Here is another one,xg kick panel seat belt hole is further up than xf,behind it says hole for 92 and hole for 94,so I had to drill out the 92 and put a blank behind the 94 one ?